Steel Plate

Product Details:

The India standard 2062 E250BR grade is a steel grade used in the manufacturing process. ... Because of the IS 2062 E250BR grade the HOT ROLLED IS 2062 E250BR PLATES are also possessed various characteristics like resistance to corrosion and oxidation in reducing the temperature.

Product Details:

P20 Mold Steel is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The steel is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.

Product Details:

Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon .

Product Details:

EN8 is an unalloyed medium carbon steel grade with reasonable tensile strength. ... EN8 is widely used for applications which require better properties than mild steel but does not justify the costs of an alloy steel. EN8 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance.

Product Details:

D2 is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength. All our D2 tool steel flats and squares are cut from plate and can be supplied to any dimensions you require.

Product Details:

HCHCR-D3 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition.

Product Details:

C45 grade steel is a medium carbon steel offering moderate tensile strengths. The material is capable of through hardening by quenching and tempering on limited sections but can also be flame or induction hardened to Hrc 55.

Product Details:

En19 steel is a high quality engineering alloy steel containing chromium and molybdenum. It falls in a class of low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. It can be heat treated in a number of ways to give it a combination of properties.

Product Details:

EN24 is a very high strength steel alloy which is supplied hardened and tempered. The grade is a nickel chromium molybdenum combination - this offers high tensile steel strength, with good ductility and wear resistance characteristics.

Product Details:

EN31 PLATE is a quality high carbon alloy steel which offers a high degree of hardness with compressive strength and abrasion resistance.

Product Details:

16MnCr5 is an alloyed case hardening steel used for e.g. mechanical engineering components. The steel can be M-treated in order to optimize the machinability.

Product Details:

16MnCr5 is an alloyed case hardening steel used for e.g. mechanical engineering components. The steel can be M-treated in order to optimize the machinability.

Product Details:

DB6 is highly recommendable for Close Die Forgings due to its characteristics of high wear-resistance, extra toughness , high hardness which is achieved with Cr-Ni-Mo-V high graded alloys. ... The standard hardness is 360 to 430 BHN. DIN 2714 is the upgraded version of DIN 2713 for better performance of dies.

Product Details:

P20 Mold Steel is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The steel is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.

Product Details:

D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379 It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world.