Steel Flat

Product Details:

D2 steel is an air hardening, high-carbon, high-chromium tool steel. It has high wear and abrasion resistant properties. It is heat treatable and will offer a hardness in the range 55-62 HRC, and is machinable in the annealed condition. D2 steel shows little distortion on correct hardening. D2 steel’s high chromium content gives it mild corrosion resisting properties in the hardened condition.Cold-work tool steels include the high-carbon, high-chromium steels or group D steels. These steels are designated as group D steels and consist of D2, D3, D4, D5, and D7 steels. These steels contain 1.5 to 2.35% of carbon and 12% of chromium. Except type D3 steel, all the other group D steels include 1% Mo and are air hardened. Type D3 steel is oil-quenched.

Product Details:

Application: Automobile Industry

Width: 40 to 700 mm

Coefficient of thermal expansion at Degree C: 20-500 Deg C

Cooling: Furnace

Hardness HB: Max 235

Soft annealing Degree C: 710 - 740 Deg C

Product Details:

EN24steel is a popular grade of through-hardening alloy steel due to its excellent machinability in the "T" condition. EN24T is used in components such as gears, shafts, studs and bolts, its hardness is in the range 248/302 HB. EN24T can be further surface-hardened to create components with enhanced wear resistance by induction or nitriding processing.

Product Details:

Diameter: 16 to 500 mm

Usage/Application: Automobile Industry

Grade: HCHCR Steel

Material: Steel

Corrosion Resistance: Yes

Technique: Hot Rolled

Product Details:

HCHCR-D3 steel is Cold Work Steel with High Carbon High Chromium contents. The Quality with high wear resistant and toughness properties due to Vanadium addition of 0.90% . Normally it supply condition is an Annealed and will offer hardness to reach 57-59 HRC. It can be machinable in the annealed condition.

Product Details:

D2 is a high carbon, high chromium cold work tool steel. Recommended for use when greater toughness is required. It offers good wear resistance and high compressive strength. All our D2 tool steel flats and squares are cut from plate and can be supplied to any dimensions you require.

Product Details:

D2 steel round bar and plate can be used to produce cold work mold with a large cross-section, complex shape, high impact force, and high wear resistance. It also is called DIN 1.2379  It is a high-carbon and high-chromium cold work mold steel. It is widely used in the world.

Product Details:

EN8 is an unalloyed medium carbon steel grade with reasonable tensile strength. ... EN8 is widely used for applications which require better properties than mild steel but does not justify the costs of an alloy steel. EN8 can be flame or induction hardened to produce a good surface hardness with moderate wear resistance.

Product Details:

P20 Mold Steel is a versatile, low-alloy tool steel that is characterized by good toughness at moderate strength levels. The steel is commonly used for plastic injection mold cavities and tooling and for die casting dies for zinc.

Product Details:

P20 tool steels are nitrided or carburized. These steels are capable of being machined into complex and large dies and molds. P20 steels are mostly used in the carburized condition. The presence of chromium and nickel enhances the toughness and hardness of P20 steels.

Product Details:

Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon .

Product Details:

C45 grade steel is a medium carbon steel offering moderate tensile strengths. The material is capable of through hardening by quenching and tempering on limited sections but can also be flame or induction hardened to Hrc 55.

Product Details:

P20 tool steels are nitrided or carburized. These steels are capable of being machined into complex and large dies and molds. P20 steels are mostly used in the carburized condition. The presence of chromium and nickel enhances the toughness and hardness of P20 steels.

Product Details:

EN24 is a very high strength steel alloy which is supplied hardened and tempered. The grade is a nickel chromium molybdenum combination - this offers high tensile steel strength, with good ductility and wear resistance characteristics.

Product Details:

EN24 is a very high strength steel alloy which is supplied hardened and tempered. The grade is a nickel chromium molybdenum combination - this offers high tensile steel strength, with good ductility and wear resistance characteristics.

Product Details:

EN31 is a quality high carbon alloy steel which offers a high degree of hardness with compressive strength and abrasion resistance.

Product Details:

Tool Steel H11 has minimal distortion during deep-hardening and air-hardening thanks to the balanced alloy content.
...

Product Details:

H13 Tool Steel has high hot-wear resistance abilities along with great strength, heat conductivity and invulnerability to hot cracking. It has good resistance to abrasion at each low and high temperature. It displays high level of toughness and ductility.

Product Details:

OHNS is an oil-hardening, non-deforming tool steel which can be hardened at relatively low temperatures. Tools and dies made from O1 will have good wearing qualities since the tungsten and higher chromium content gives improved wear resistance over the straight manganese grades.

Product Details:

DB6 is highly recommendable for Close Die Forgings due to its characteristics of high wear-resistance, extra toughness , high hardness which is achieved with Cr-Ni-Mo-V high graded alloys. ... The standard hardness is 360 to 430 BHN. DIN 2714 is the upgraded version of DIN 2713 for better performance of dies.

Product Details:

AISI M35 Tool Steel is a Cobalt-Type high speed tool steel. M35 steel is on the basis of M2 Steel, but with 5% Cobalt content increased which makes better hot hardness and wear resistance. AISI M35 Steel is suitable for heat treatment up to 66 HRC, and offers excellent cutting performance.

Product Details:

AISI Type M45 Molybdenum High Speed Tool Steel (UNS T11345) Material Notes: Used in high speed tool and cutting applications such as drills, milling processes, reamers, etc. Mo content promotes toughness, but requires more precise hardening conditions and caution about overheating.

Product Details:

En19 steel is a high quality engineering alloy steel containing chromium and molybdenum. It falls in a class of low alloy steel. It has high fatigue strength, abrasion and impact resistance, toughness, and torsional strength. It can be heat treated in a number of ways to give it a combination of properties.